The
KMC TSP-6001/6051 are combination air flow transducer and actuator units
designed primarily for variable air volume terminal units controlled via Direct
Digital Control (DDC) systems such as KMC’s Digital System. Specific
applications include slaving from the KMD-6002/6052 in dual duct or tracking
applications. Each unit mounts directly to a 1/2" diameter or 3/8" square damper
shaft, or a 3/8" diameter shaft (HFO-0011 shaft adaptor required). Damper
control is provided by an 18°/ minute or 60°/minute actuator. The actuator is
controlled by a three-state analog signal; less than 2 VDC drives CCW, greater
than 2.5 VDC drives CW, and 2.25 VDC is idle. A minimum of 50 in-lbs of torque
is provided. Both minimum and maximum stops are standard to limit the rotation.
A gear disengagement feature allows positioning the damper and/or gear-train
without energizing the actuator. The TSP-6001/6051 has an on-board flow-through
sensor for use with a single or multi-point differential pressure measuring
station or pitot tube. The sensor utilizes twin platinum-ceramic resistance
temperature sensors. Velocity measurement is maintained at 3% accuracy over the
range of 0 to 3,000 feet per minute (FPM).
Accessories are available:
CME–1002
Single auxiliary switch
CME–1004
Double auxiliary switch
CME–1006
Triple auxiliary switch
HFO–0011
3/8" shaft adaptor
HMO–4518
Connector for 1/2" flexible metal conduit
HMO–4520
Compression connector for plenum cable
