KMC MEP-7200/7500/7800 Series
Direct-Coupled, ControlSet Actuators (120/180/320 in-lbs.)
These powerful, durable, direct-coupled actuators provide tri-state or
proportional control for large control air dampers or valves in HVAC systems. A
minimum torque of 120, 180, or 320 in-lbs. is available over the 94° angular
rotation.
The proportional actuator models accept a 0–10 VDC or 4–20 mA
control signal input from a thermostat, controller, or building automation
system. A user-initiated, auto-mapping feature provides better equipment
control by reassigning the 0–10 VDC input signal range over a reduced rotation
range (from 45° to 94°). These models also feature a switch-selectable, 0–5
or 0–10 VDC voltage feedback output that is proportional to the actuator
position.
The tri-state models are designed for use with floating
thermostats, controllers, or building automation systems. They feature a 10,000
ohm (+/– 10%), three-wire potentiometer feedback output.
All actuators mount directly on 3/8" up to 1.05" round or 5/16" up to 5/8"
square shafts, eliminating the need for expensive and complicated linkages. A
non-rotation bracket, to prevent lateral movement, is included with each
actuator. A gear disengagement button allows manual positioning of the damper
and/or gear train without energizing the actuator. The actuators are protected
against overloading and do not require end or limit switches.
Part No
Description
Unit Price
Data Sheet
Add to Cart
MEP-7201
ACTUATOR 24 VAC/VDC TRISTATE 120 IN.-LB. 75-90 SEC.
