KMC MEP-7012, 7712 Direct Coupled Proportional ControlSet Actuators 150/300
Inch-Pound
These ControlSet Actuators are designed to regulate large control air dampers
and valves in HVAC systems. Both accept a 2–10 VDC or 4–20 mA control signal
input from a thermostat, controller, or building automation system. A 1-5 VDC
feedback voltage output is provided which is proportional to the control signal.
These actuators mount directly to 3/8" up to 1.05" round or 5/16" up to 5/8"
square shafts, eliminating the need for expensive and complicated linkage. A
minimum 150 in-lbs. of torque is available on the 7012 and a minimum 300 in-lbs.
of torque is available on the 7712 over the 94° angular rotation.
A gear disengagement feature allows positioning of the damper and/or gear train
without energizing the actuator. The actuators are protected against overloading
and do not require end or limit switches.
