KMC MEP-7003/7053/7703/7753 Direct Coupled, Tri-State, ControlSet Actuators, 150 and
300 Inch-Pound
These are repair parts only. For new installations, see the
MEP-7013/7063/7713/7763 ControlSet Actuators.
The KMC MEP-7003/7053/7703/7753 ControlSet Actuators are factory mounted onto
VEP-5000 Series flanged or butterfly valves, for use in HVAC systems.
These Actuators have Tri-State control signal inputs with an added feedback
potentiometer output. The MEP-7053 and 7753 include a fail-safe feature.
The bi-directional motors may be controlled via a SPDT floating thermostat,
controller or building automation system. A minimum 150 in-lb. of torque is
available on the 7003/7053 and a minimum of 300 in-lb of torque is available on
the 7703/7753 over the 94° angular rotation.
A gear disengagement feature allows positioning of the valve/gear train without
energizing the actuator. The actuators are protected against overloading and do
not require end or limit switches.
The optional fail-safe feature allows selection for the direction of return, and
a delay allows full charge before normal operation resumes.
Accessories are available:
CME–7001
Single Auxiliary Switch
CME–7002
Dual Auxiliary Switch
HMO-4528 Replacement “V” bolt and nuts
Part No
Description
Unit Price
Data Sheet
Add to Cart
MEP-7053
OBSOLETE REPLACE WITH MEP-7553 ACT 150IN-LBS 3WIRE WITH FB FSAFE
