KMC MEP-7002/7052/7702/7752 Direct Coupled, Proportional, ControlSet Actuators, 150
and 300 Inch-Pound
These are repair parts only. For new installations, see the
MEP-7012/7062/7712/7762 ControlSet Actuators.
The KMC MEP-7002/7052/7702/7752 ControlSet Actuators are factory mounted onto
VEP-5000 Series flanged or butterfly valves, for use in HVAC systems.
These Actuators accept a 2 to 10 VDC control signal input from a thermostat,
controller, or building automation system. A 1 to 5 VDC feedback voltage output
is provided. The output is proportional to the control signal. The MEP-7052 and
7752 include a fail-safe feature.
A minimum 150 in-lb. of torque is available on the 7002/7052 and a minimum of
300 in-lb of torque is available on the 7702/7752 over the 94° angular rotation.
A gear disengagement feature allows positioning of the valve/gear train without
energizing the actuator. The actuators are protected against overloading and do
not require end or limit switches.
The optional fail-safe feature allows selection for the direction of return, and
a delay allows full charge before normal operation resumes.
Accessories are available:
CME–7001
Single Auxiliary Switch
CME–7002
Dual Auxiliary Switch
HMO–4535
Non-rotational bracket
HMO–4536
Stop Kit
HLO–1020
Crank arm Kit
HCO–1152
Weather Shield Kit
Part No
Description
Unit Price
Data Sheet
Add to Cart
MEP-7752
OBSOLETE REPLACE WITH MEP-7852 ACT 300IN-LBS 2-10VDC FAILSAFE
