KMC MEP-5373/5374 Direct Coupled Tri-State Fail-Safe ControlSet Actuator
The
KMC MEP-5373/7374 ControlSet Actuators are designed to control small dampers
such as air terminal unit dampers or specific VEP series valves. Mounts directly
to a 1/2” or 3/8” diameter damper shaft, eliminating the need for expensive and
complicated linkage. When mounting to a 3/8” diameter shaft, the HFO-0011 shaft
adaptor is required (must be ordered separately). These bi-directional motors
may be controlled via an SPDT floating thermostat or building automation
system. A minimum of 50 in-lb. of torque is provided over the maximum angular
rotation of 95°. Both minimum and maximum end stops are standard to limit the
rotation. A gear disengagement feature allows positioning of the damper
and/or gear train without energizing the actuator. The MEP-5374 incorporates a
10K ohm feedback potentiometer for remote indication of actuator position.
An optional single, double or triple auxiliary switch can be field installed.
Accessories are available:
CME–1002
Single auxiliary switch
CME–1004
Double auxiliary switch
CME–1006
Triple auxiliary switch
HFO–0011
3/8" shaft adaptor
HMO–4518
Connector for 1/2" flexible metal conduit
HMO–4520
Compression connector for plenum cable
HMO–4526
Female connector for 1/2" conduit
