KMC MEP-5000 Series Direct Magnetic Coupled Tri-State ControlSet Actuator
The
KMC MEP-5000 series 3-wire ControlSet Actuators are designed to control small
dampers such as air terminal unit dampers or VEP-40 series valves.
The
MEP-5061 is an 18°/minute actuator and the MEP-5071 is a 60°/minute actuator.
The actuator mounts to a 1/2” or 3/8” diameter damper shaft, eliminating the
need for expensive and complicated linkages. When mounting to a 3/8” diameter
shaft, the HFO-0011 shaft adaptor is required and must be ordered separately.
These bidirectional motors may be controlled via an SPDT floating thermostat or
building automation system. A minimum of 50 in-lb of torque over the maximum
angular rotation of 95° is provided. Both minimum and maximum end stops are
standard to limit the rotation. A gear disengagement feature allows
positioning of the damper and/or gear train without energizing the actuator.
An optional feedback potentiometer and/or a single, double or triple auxiliary
switch can be field added.
Accessories are available:
CME–1002
Single auxiliary switch
CME–1004
Double auxiliary switch
CME–1006
Triple auxiliary switch
CME–2003
3-wire potentiometer, 10 K ohm, 1/3 watt
HFO–0011
3/8" shaft adaptor
HMO–4518
Connector for 1/2" flexible metal conduit
HMO–4520
Compression connector for plenum cable
HMO–4526
Female connector for 1/2" conduit
