KMC MEP-1261, 1263 Direct Coupled Tri-State ControlSet Actuators
The
KMC MEP-1261/1263 ControlSet actuators are designed to regulate large control
air dampers and valves in HVAC systems. The MEP-1261 is the standard tri-state
controlled actuator, the MEP-1263 includes a feedback potentiometer feature. The
actuator mounts directly to 3/8” up to 3/4” round, or 5/16” up to 9/16” square
shaft, eliminating the need for expensive and complicated linkages. The
bi-directional motors may be controlled via an SPDT floating thermostat,
controller, or building automation system. A minimum 100 in-lb. of torque is
available over the 90° angular rotation. A gear disengagement feature allows
positioning of the damper and/or gear train without energizing the actuator.
The actuator is protected against overloading and does not require end or limit
switches.
Accessories are available:
HMO–4517 Front mounting backplate
HMO–4518 Snap-in connector for 1/2" flexible metal conduit
HMO–4519 Non-rotation bracket
HMO–4520 Connector for plenum cable
HMO–4526 Female connector for 1/2" conduit
HMO–4528 Replacement “V” bolt and nuts
VTD–0804 Ball joint
VTD–1404 Short crankarm
VTD–1405 Long crankarm
