 HOME > KMC HVAC Parts > Electric Valves > VEP-342 Series
Previous Page
The VEP-3420 and VEP-3421 series are 3-way diverting,
zone valves available in 3/4" and 1" line
sizes designed to regulate hot or chilled water in
VAV terminal unit reheat coils, fan coil units and
induction units. The compact size allows easy installation
in small enclosures. The fully enclosed electric actuator
has heat resistant lead-wires and is readily installed
or removed, via a screw-on ring nut.
These valves utilize three different types of actuators:
The MEP-3001 (24VAC) is used for systems requiring
2-position fail-safe (full flow) operation. The unit
utilizes a PTC thermal element for dependable long-life
and noise-free operation. The MEP-3010 is a tri-state
actuator which requires separate 24 VAC signals to
drive the actuator open
or closed. With both signals off, the actuator is
motionless.nless.
The MEP-3011 proportional actuator requires a 24 VAC
power source and a 2 to 10 VDC input signal to drive
the actuator. The proportional actuator
powers down at the full open or closed position. The
proportional actuator also recalibrates the closed
to open stroke to the control signal after 4000 cycles,
or after a power failure.ure.
Features:
- Available in with three types of actuators
- Fully enclosed electric actuator
- Compact size
|