 HOME > ACI Sensors > Current Transmitters
Previous Page
The A/CTA Series current sensors monitor the current
flowing to electrical equipment or buildings.
The magnitude of this current is then converted into
a linear and proportional 4 to 20 mA output signal,
which can be monitored by your Building Management,
DDC, or PLC controller. The A/CTA Series current
sensors are available in either an Average or True
RMS output version. All of these sensors have
jumper selectable input ranges except for the 0 to
5 Amp input range. These current sensors should
be used in load trending (current monitoring) type
applications.
The A/CTE and A/CTV series current sensors monitor
the current flowing to electrical equipment or buildings.
The magnitude of this current is then converted into
a linear 0 to 5 or 0 to 10 VDC output signal, which
can be monitored by your Building Management, DDC,
or PLC controller. The A/CTE and A/CTV series
current sensors have jumper selectable input ranges
except for the 0 to 5 Amp input range. These
current sensors should be used in load trending (current
monitoring) type applications.
|